SUBSTRATE
- Floor & Wall
- Interior & Exterior
- A liquid admixture for improving the properties of cement-based mortar and concrete;
-
- Increase the resistance to acid, alkali, and chemical substances
- Increase the adhesion between existing cement and new cement
- Reduce water permeability
- Reduce shrinkage from the reaction of water
- Increase bonding property of mortar for;
- Rendering mortar
- Waterproofing mortar
- Repair mortar
- Cement-based tile adhesive and grout
- Texture preparation
LIMITS OF USE
- Do not use directly on coated floor or base coat.
- Do not use undiluted.
- Do not use when the temperature below 0°C.
COMPOSITION
- Co-polymer acrylic
- No solvent
- No silicone component
- No hazardous substances
- No flammable substances
PERFORMANCE
- Bonding strength with concrete: 1.3 N/mm2 (MPa)
- No leakage when positive water pressure: 0.7 N/mm2 (MPa)
- Resistance to shrinkage (NFP 84-402): 0.8 mm (air)
- Density: 1
- pH: 3.5 - 4.5
- Note: These test results are from laboratory test. They might be slightly different from on-site results because of the differences in applications and conditions.
SUBSTRATE PREPARATION
- All substrates should be sound and well prepared, clean and free from dust.
APPLICATION
- Shake weber.neo latex well until having uniform thick-white liquid.
- Dilute the product with water according to the proportion shown in table below.
- Pour the mixture into mortar as per the applications stated in the table.
- Mix well until obtaining homogeneous paste.
SHELF LIFE & STORAGE
- One year after manufacturing date when stored unopened in dry and ventilated place (store airtight in dry and ventilated conditions, if remained in opened gallon).
