SUBSTRATE
- Floor & Wall
- Interior & Exterior
- Very porous or high absorbent tile such as clay tile, natural stone
COMPOSITION
- Co-polymer acrylic
- No solvent
- No silicone component
- No hazardous substances
- No flammable substance
PERFORMANCE
- Density: 1
SUBSTRATE PREPARATION
- Before applying the product, wait for at least 1 hour after grouting.
- Make sure that the grouted joints are dry and clean.
- Clean and remove any particles or contaminations remaining in the joints in order to ensure a good grout adhesion and the color uniformity.
PRODUCT PREPARATION
- Shake well before use.
APPLICATION
- For new grouted joints: apply weber.klin JCR with a paint brush onto the grouted joints 24 hours after grouting.
- For existing grouted joints: make sure that the joints are dry, clean and free from any dirt before applying the product.
- Remarks:
- Immediately clean off the product with warm water if being stained on the tile surfaces.
- Two coats are recommended for long protection by waiting 1 to 2 hours before applying the second coat
- Allow the product to dry completely for 24 hours before normal cleaning process.
SHELF LIFE AND STORAGE
- One year after manufacturing date when stored unopened in dry and ventilated place (store airtight in dry and ventilated conditions, if remained in opened bag)
