Weber Saint-Gobain - Official website of the company

webercolor poxy

webercolor poxy
webercolor poxy

Product Benefits

  • Ideal for fixing tile, mosaic, glass mosaic, and resin mosaic in swimming pool.
  • Ideal for tiling onto the area where chemical and acidic resistant properties are required e.g. dairy, food industry, hospital, etc. 
  • Can be used to fix tile, mosaic, glass mosaic, and resin mosaic onto most substrate including metal, plastic, and PVC. 
  • Can be both adhesive and grout for fixing glass mosaic in kitchen, bathroom, swimming pool, spa, and sauna. 

High-performance epoxy-resin adhesive for tiling on all substrates.  

Product Features

Technical Data

  • Pot life (in shade) : 30 minutes
  • Hardening time : 4 - 8 hours
  • Optimum time for chemical resistance :
    • 4 days at 20oC or
    • 8 days at 10oC
  • Temperature resistance : - 40oC to + 100oC Up to + 180oC in case of thermal shock
  • Bonding strength in dry condition : > 3 N/mm2
  • Bonding strength in wet condition : > 3 N/mm2
  • pH : 10 - 11
    • Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions.

Limit of use

Chemical resistance table

High-performance epoxy-resin adhesive for tiling on all substrates.  Ideal for fixing tile, mosaic, glass mosaic, and resin mosaic in swimming pool
  • Carefully check the chemical substances, which affect weber.color poxy, at the below table



มาตรฐานนานาชาติ / ยุโรป

  • ค่าแรงเฉือน ISO 13007 part 2-4.3.4 or EN 12003-7.2
    • มาตรฐาน ≥ 2 N/mm2 l ผลการทดสอบ 8.4 N/mm2
  • ค่าแรงเฉือนหลังจากแช่น้ำ ISO 13007 part 2-4.3.5 or EN 12003-7.3
    • มาตรฐาน ≥ 2 N/mm2 l ผลการทดสอบ 7.4 N/mm2
  • ค่าแรงเฉือน หลังจากมีแรงสั่นสะเทือน ISO 13007 part 2-4.3.8 or EN 12003-7.5
    • มาตรฐาน ≥ 2 N/mm2 l ผลการทดสอบ 9.9 N/mm2
  • แรงยึดเกาะของกาวกับกระเบื้อง ณ เวลาต่างกัน ISO13007 part 2-4.1 or EN 1346
    • มาตรฐาน ≥ 0.5 N/mm2 l ผลการทดสอบ 4.2 N/mm2

มาตรฐานนานาชาติ / ยุโรป

  • ความทนทานต่อการสึกกร่อน part 4-4.4 หรือ EN 12808-2
    • มาตรฐาน ≤ 250 mm3 l ผลการทดสอบ 67 mm3
  • การทนต่อการบิดตัวในสภาพวะปกติ ISO 13007 part 4-4.1.3 หรือ EN 12808-3
    • มาตรฐาน ≥ 30 N/mml ผลการทดสอบ 30 N/mm2
  • การทนต่อแรงกดอัดในสภาวะปกติ ISO 13007 part 4-4.1.4 หรือ EN 12808-3
    • มาตรฐาน ≥ 45 N/mm2 l ผลการทดสอบ 64.38 N/mm2
  • การยืดหดตัว part 4-4.3 หรือ EN 12808-4
    • มาตรฐาน ≤ 1.5 mm./m l ผลการทดสอบ 0.46 mm./m
  • ค่าการดูดซึมหลังจาก 240 นาที ISO 13007 part 4-4.2 หรือ EN 12808-5
    • มาตรฐาน ≤ 0.1 g l ผลการทดสอบ 0.00 g


Send or download the documentation

You can either send the documentation to en-email address, or download it.


Application property

  • Pot life: 30 - 50 minutes at room temperature
  • Hardening time: 12 to 48 hours
  • Optimum hardening and chemical-resistant time: 4 days at 20°C and 8 days at 10°C
  • Recommended thickness: 3 to 5 mm
  • Time before traffic: 4 to 8 days  

Substrate Preparation

  • For new substrate: it should be flat, hard, level, dry, and clean with normal absorption.    
  • For old substrate: scrape off any peel-off coatings or remove any de-bonding tiles and do the re-tiling.
  • Clean the surface until free from grease, dust, or any stains. 
  • If the surface is very porous (high absorption), it should be wet until reaching its saturated point before tiling.
  • In case of new screed or render, the substrate should be fully cured for 7 days per 1 cm thickness of concrete before tiling.  


  • Mix the 2 components together by the ratio of 1:3 (upper part: lower part).  Stir the mixture until homogenious paste is obtained.
    • After proper mix, leave the product for 3 to 4 minutes before using in order to have the complete chemical reaction. 
  • The mixture of weber.color poxy should be used within 30 minutes and kept away from heat & sunlight.  




  • For wall: Use weber rubber trowel or an appropriate tool to fill tile joints diagonally.    
  • For floor: Apply the mixed grout onto the area of 1 m2, and then use the rubber trowel to diagonally fill the joints.
  • After 15 to 20 minutes or after filling the joint on the area of 1 m2, wipe off any excess grout from tile surfaces with warm-damp abrasive sponge
  • Clean off the excess grout again with warm-damp sponge to ensure there is no excess of weber.color poxy left on the surfaces.
  • Wait for 4 - 8 hours to ensure the good bonding of grout.
    • The optimum hardening time and the optimum time to resist chemical is 4 days at 20°C or 8 days at 10°C  



Recommendation for Use

  •  Ambient temperature has an effect on the hardening rate of the product.
  • Instantly wipe off any excess of weber.color poxy with a warm-damp sponge before it sets.
  • It is recommended to grout the joints of tiles being fixed by weber.color poxy with weber.color poxy.
  • Clean the tools immediately after use.
  • Wear protective gloves.
  • Avoid contact with skin and eyes.  
  • Avoid applying the epoxy adhesive in lumps (as shown in the picture 1) at the tile back.  This will create voids underneath the tiles, which could lead to the fragility of tiles and water permeation.
  • Avoid using the epoxy adhesive on red-hot substrates or the substrates exposing to direct sunlight.  
  • To maintain straight joints, spacers should be used (as shown in the picture 2).  The joint width is controlled by the width of spacer.
  • To avoid water leakage into underneath tiles and to avoid tile movement when there is foot traffic, the joint width is recommended to be at least 1.5 mm for wall and at least 3 mm for floor.  



Key Benefits

  • Resist to chemical and high acidity
  • Anti-bacteria and anti-infection properties
  • Ideal use for with the areas where heavy-duty property is required
  • Resist to temperature from -40°C to +100°C (+180°C in case of thermal shock)
  • Resist to water pressure in swimming pools
  • Available in 4 colors
  • For joint width 2-12 mm without crack



  • 5 kg bucket (Approximately one bucket/ 2.5 m2)



  • 4 colors : White , Light Grey, Dark Grey, Black
  • See colors here