Weber Saint-Gobain - Official website of the company

weber.color HR

weber.color HR
weber.color HR

Product Benefits

  • For 2 - 10 mm joint width
  • Resist to water pressure
  • Resist to chemical cleaning agent like chlorine
  • Anti-fungus and anti-dirt
  • Resist to temperature between -40oC to + 100oC
  • Low VOCs

High resistance tile grout for swimming pools, spas, steam rooms, and saunas

Product Features

Product Description

weber.color HR is high resistance tile grout specially designed to use inswimming pools, spas, and saunas providing resistance to water pressureand chlorine ideal for grouting in swimming pools, spas, saunas on both

Technical Data

  • Density of powder : 1.3 g/cm3
  • Chemical curing time : 3 - 4 minutes
  • Pot life (in shade) : 20 minutes
  • Waiting time after tiling before grouting : 24 hours
  • Recommended joint width : 2-10 mm
  • Waiting time before filling in with water : 3 days
    • Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions

Certified Standard

International/European standard

  • Abrasion resistance ISO 13007 part 4.4.4 or EN 12808-2
    • Standard ≤ 2,000 mm3 l Result 297 mm3
  • Flexural strength under standard condition ISO 13007 part 4-4.1.3 or EN 12808-3
    • Standard ≥ 2.5 N/mm2 l Result 6.17 N/mm2
  • Compressive strength under standard condition ISO 13007 part 4-4.1.4 or EN 12808-3
    • Standard ≥ 15.0 N/mm2 l Result 27.29 N/mm2
  • Shrinkage ISO 13007 part 4-4.3 or EN 12808-4
    • Standard ≤ 3.0 mm/m l Result 1.29 mm/m
  • Water absorption after 30 minutes ISO 13007 part 4-4.2 or EN 12808-5
    • Standard ≤ 5.0 g l Result 0.07 g
  • Water absorption after 240 minutes ISO 13007 part 4-4.2 or EN 12808-5
    • Standard ≤ 10 g l Result 0.23 g

 

 

Documentation

Portable Document Format (PDF)

Security datasheet

Certificate datasheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Application

Substrate preparation

  • Properly clean the joints until free from any dirt to make sure of goodbonding and color uniformity
  • Avoid the application in direct sunlight, cover the areas to have shade whenworking

Mixing

  • Put 1 admixture in mixing bucket
  • Gradually add 1 weber.color HR powder into the bucket and mix until obtaining
  • homogeneous lump-free paste
  • Do not remix anything else
  • The mixture of weber.color HR can be used within 20 – 30 minutes after mixing when placing in shade

Application

  • Use rubber trowel or grout trowel to diagonally fill up the joints.
  • Wipe off excess grout with damp sponge 10 - 20 minutes before the grout sets.
  • Leave for 1 hours and then clean tiles' surface with clean cloth
  • Wait 12 hours for the grout to set and then sprinkle water thoroughly for 2 - 3days for curing
  • Leave for 3 days before filling in with water for reaching high resistanceproperty and good bonding

Packaging

Packaging

  • 3.7 kg and 18.5 kg bucket    

Shelf Life & Storage

  • One year after manufacturing date when stored unopened in dry and ventilated place (store airtight in dry and ventilated conditions, if remained in opened bag)