Weber Saint-Gobain - Official website of the company

weber.color slim

weber.color slim
weber.color slim

Product Benefits

  • For very thin joints from 0.2 to 3 mm.
  • Flowable giving good adhesion with the grouted joints.
  • Anti-fungus and black mold Low porosity: anti-dirt.
  • For granito tiles, marbles, and granites.
  • Low VOCs.

Extra narrow tile grout for joint width between 0.2-3 mm with anti-fungus property 

Product Features

Key Benefits

  • Suitable for large-format tiles, marbles, and granites that are tiled edge-to-edge. Giving nicely grouted joints. 
  • Easy to mix, no gravitate falling esp. when grouting on wall. 
  • Pot life is 30 minutes, giving more time to work. No need to partially mix. 
  • Biocide provides anti-fungus and anti-algae properties 
  • Low porosity and protect the grouted joints from dirt stain with hydrophobic agent. 
  • Modified polymer provides durability and fast filling of grout into joints. 
  • Suitable for both wall and floor, internal and external areas.

Performance

  • Type : Cementitious grout 
  • Density : 0.85-0.95 g/cm3 
  • Chemical curing time : 3-4 minutes 
  • Pot life : 30 minutes 
  • Time before grouting after tiling : 24 hours 
  • Working temperature : + 5oC - +35o
  • Recommended joint width : 0.2-3 mm. 
  • Time before traffic : 24 hours 

Limit of use

  • Not suitable when the joint width bigger than 3 mm. (instead weber.color classic or weber.color power or weber.color plus or other should be used for each suitable application). 
  • Not suitable to use when the substrate movement is expected; exterior wall, parking area, wooden surface for instance (instead weber.color outside should be used). 
  • Not suitable to use in swimming pool (instead weber.color HR or weber.color poxy should be used). 
  • Not suitable if grout is required to be chemical-resistant and acid-resistant; industry, hospital, food-storage area, for instance (instead weber.color poxy should be used).  

Certified Standard

International/European standard

 

  • Abrasion resistance ISO 13007 part 4.4.4 or EN 12808-2
    • Standard ≤ 2,000 mm3 l Result 167 mm3
  • Flexural strength under standard condition ISO 13007 part 4-4.1.3 or EN 12808-3
    • Standard ≥ 2.5 N/mm2 l Result 4.80 N/mm2
  • Compressive strength under standard condition ISO 13007 part 4-4.1.4 or EN 12808-3
    • Standard ≥ 15.0 N/mm2 l Result 20.33 N/mm2
  • Shrinkage ISO 13007 part 4-4.3 or EN 12808-4
    • Standard ≤ 3.0 mm/m l Result 2.52 mm/m
  • Water absorption after 30 minutes ISO 13007 part 4-4.2 or EN 12808-5
    • Standard ≤ 5.0 g l Result 0.97 g
  • Water absorption after 240 minutes ISO 13007 part 4-4.2 or EN 12808-5
    • Standard ≤ 10 g l Result 1.45 g

 

 

Documentation

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Application

Substrate preparation

  • The joints should be clean and dry before grouting.
  • Clean and remove any particles or contaminations remaining in the joints in order to ensure a good grout adhesion and the color uniformity.    

Mixing

  • Put clean water in a bucket (the water should be at room temperature, not warm or hot). 
  • Gradually add weber.color slim in the water and mix at the same time until homogeneous lump-free paste is obtained.  The mixing proportion is;    
    • 1:3           by weight (water : grout)     
    • 1:2.5        by volume (water : grout) 
    • After proper mix, leave the product for 3 - 4 minutes before using in order to have the complete chemical reaction. 
  • The mixture of weber.color slim should be used within 30 minutes and kept away from heat & sunlight.  

Application

  • For wall: Use weber rubber trowel or an appropriate tool to fill tile joints diagonally.    
  • For floor: Apply the mixed grout onto the area of 1 m2, and then use the rubber trowel to diagonally fill the joints.
  • Wipe off the excess grouts with damp sponge before the grout sets.
  • Clean tile surfaces with clean cloth after 2 hours.
  • Wait for 24 hours before traffic to ensure the good bonding of grout.  

 

 

Certified standard (pass iso 13007 and en 13888)

Recommendation for Use

  • In case of clay tiles or porous tiles, weber.klin tect should be used before grouting to protect the tile surfaces from grout-color stains.  

Consumption

  • 19 m2 per bag 
  • Actual consumption shows in the above consumption table
    • Remark: Coverage being shown in the table is from calculation. Actual coverage would be different from the table, it depends on applications at site.

Packaging

Packaging

  • 1 kg bag 

Shelf Life & Storage

  • One year after manufacturing date when stored unopened in dry and ventilated place (store airtight in dry and ventilated conditions, if remained in opened bag)

Videos