Weber Saint-Gobain - Official website of the company

weber.tape BE 14

weber.tape BE 14
weber.tape BE 14

Product Benefits

  • Highly flexible and 100% waterproof
  • Chemical resistance
  • To cover joints between floors and walls
  • Use with flexible waterproof ; weber.dry seal or weber.dry top
  • To reinforce between boards of fiber-cement boards and gypsum boards

Flexible reinforce waterproofing tape for joints.

Product Features

Key Benefits

  • 100% waterproof
  • Resistant to hydrostatic pressure
  • Permanent resistant to tearing
  • Permanent resistant to many chemicals
  • Permanent resistant to frost
  • UV resistant

Technical performance

  • Stanching area material : Rubber nitrile butiadiene
  • Holding area material : PET woven
  • Width of stanching : 70 mm approx
  • Width of holding area : 120 mm approx
  • Longtitudinal lengtening at Fz maxi DIN 53354: 56% approx
  • Longtitudinal lengtening at breaking point DIN 53354: 260% approx
  • Maxi longtitudinal tension : 66 N/15 mm approx
  • Maxi transversal tension : 48 N/15 mm approx
  • Longtitudinal tensile stregnth : 5.6 N/mm2 approx
  • Transversal tensile stregnth : 5.4 N/mm2 approx
  • Vapor barrier value sd DIN or EN 1062-2 : 2.7 mm approx
  • Grooving pressure test : Waterproof at 3 bars
  • Resistance to chemicals : Resistant
    • Note: These test results are from laboratory test.  They might be slightly different from on-site results because of the differences in applications and conditions. 

Recommendation

  • weber.tape BE14 is recommended to use with weber waterproofing product to waterproof and reinforce joints of;
    • Dissimilar materials
    • Floor and floor
    • Wall and wall
    • Floor and wall
      • Cover material on weber.tape BE14 is essential in the areas exposing to traffic.
        • Note: For application on any other substrate, please contact Saint-Gobain Weber for technical assistance.

Certified Standard

Testing items 

  • Burst pressure : max.
    • Standard Internal l Result 2.5 bar
  • Breaking load longitudinal
    • Standard DIN EN ISO 527-3 l Result 91 N/ 15 mm
  • Breaking load lateral
    • Standard DIN EN ISO 527-3 l Result 44 N/ 15 mm
  • Extension break longitudinal
    • Standard DIN EN ISO 527-3 l Result 33%
  • Extension break lateral
    • Standard DIN EN ISO 527-3 l Result 125%
  • Power absorption at 25% Elasticity lateral
    • Standard DIN EN ISO 527-3 l Result 0.52 N / mm
  • Power absorption at 50% Elasticity lateral
    • Standard DIN EN ISO 527-3 l Result 0.73 N / mm
  • Resistance to water pressure
    • Standard DIN EN 1928(Version B) l Result > 1.5 bar
  • UV-Resistance : min.
    • Standard DIN EN ISO 4892-2 l Result 500 h
Chemical Properties: Resistance after storage over 7 days by room temperature in following chemicals + = resistant 0 = weakened - = non resistant
Hydrochloric acid 3% Internal +
Sulphuric acid 35% Internal +
Citric acid 100 g/l Internal +
Lactic acid 5% Internal +
Potassium hydroxide 3% / 20% Internal +/0
Sodium hypochlorite 0.3 g/l Internal +
Salt water (20 g/l Sea water salt) Internal +

Documentation

Portable Document Format (PDF)

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Packaging

Packaging

  • 10 m roll (10 cm wide)

Shelf life and storage

  • One year after manufacturing date when stored unopened in dry and ventilated place.

Color

Color

  • White tape with middle yellow strip